Youve actually discovered the little secrets to reducing the operating costs of the box-type high-pressure filter press!_Product Center_Plunger pump_Plunger mud pump

You've actually discovered the little secrets to reducing the operating costs of the box-type high-pressure filter press!

创始人

2025-09-01 10:56:52

0次

客户案例-压滤机

Filter press manufacturers in Xianyang will introduce to you how to reduce the operating costs of box-type high-pressure filter presses. Let's learn about it together!

Saving operating costs is an eternal topic across all industries. For most users who use box-type high-pressure filter presses, in addition to paying attention to the working efficiency of the filter press, the cost is even more important. The accumulated cost saved can be a considerable amount.

1. Filter Plates

Most of the filter plates of current box-type high-pressure filter presses are made of polypropylene, and this is also due to the equipment's working environment. If the filter plates of the filter press are not properly maintained, the cost incurred by replacing the filter plates will be a significant expense.

Warm Tip: During the operation of the filter press, if any suspicious solids are found on the edges of the filter plates, they should be cleaned up in a timely manner.

2. Filter Cloths

Filter cloths are one of the materials that are prone to damage on box-type high-pressure filter presses, and they also account for a relatively large proportion of the equipment's operating costs.

On one hand, we need to select appropriate filter cloths based on the characteristics of the filtering medium, such as acidity and alkalinity, corrosiveness, water permeability, etc. On the other hand, we also need to properly clean the filter cloths.

Warm Tip: When using the box-type high-pressure filter press, we should try our best not to move or change the filter cloths casually. If the frequency of the filter cloths being in operation increases, it means the chance of the filter cloths breaking will increase, which also raises the equipment's operating costs. At the same time, we should minimize the entry of relatively sharp objects into the box-type high-pressure filter press, which can also greatly reduce the damage rate of the filter cloths, thereby saving a part of the costs.

3. Hydraulic Oil

There are two main aspects to saving hydraulic oil: preventing leakage and preventing contamination.

First, we should tightly close the oil filling valve of the hydraulic system and the channels that are in direct contact with hydraulic oil. This can minimize the contamination of hydraulic oil by external substances, thereby reducing the need for hydraulic oil replacement as much as possible and potentially saving a portion of costs.

For the hydraulic system itself, when hydraulic oil circulates within the system, the hydraulic system will gradually age due to the influence of environmental factors and the passage of time, leading to leakage. Therefore, we need to regularly inspect parts such as sealing rings. Once leakage occurs, we must stop operation promptly and carry out repairs in a timely manner to minimize leakage as much as possible.

Warm Tip: The hydraulic oil level in the box-type high-pressure filter press should be maintained at approximately 45-85%. It must not be too high (note: original text "太慢" is assumed to be a typo for "太多", meaning "too much") nor too low.

Part of the content in this article is sourced from the internet. If there is any infringement, please contact us to have it removed.

consistently translated as "box-type high-pressure filter press

上一篇：In-depth Analysis: Why Piston Pumps Are Preferred for Desulfurization Wastewater in Brick Factories

下一篇：Huaxing YB Series Filter Press Feed Plunger Pump: Low Post-Maintenance Costs, Manufacturer of Filter Press Plunger Pumps

You've actually discovered the little secrets to reducing the operating costs of the box-type high-pressure filter press!

1. Filter Plates

2. Filter Cloths

3. Hydraulic Oil

相关内容

热门资讯